baichy

Processing ability: 5-1000 t/hBrief introduction: The spring cone crusher has been developed to crush feed materials into desired end products efficiently, reliably and economically.

Application:

Spring Cone Crusher breaks material by squeezing or compressing it between convex and concave shaped surfaces covered by manganese as the wear surface. Normally used as the secondary or tertiary crusher, the cone crusher has been developed to crush high or medium hardness material, such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, etc.

Features:

1. simple structure and High efficiency low energy consumption
2. diversity crushing chamber types
3. special sales form and easy operation
4. overload protection and easy maintenance

Working principle:

Cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.

Technical data:

Model	Cone Diameter (mm)	Max. Feed Size (mm)	Outlet Setting Size (mm)	Capacity (t/h)	Power (kw)	Overall Dimension (mm)
PYB-600	600	66	12-25	15-25	30	1740X1225X1940
PYD-600	600	36	3-13	5-23	30	1740X1225X1940
PYB-900	900	115	15-50	50-90	55	1990X1640X2380
PYZ-900	900	60	5-20	20-65	55	1990X1640X2380
PYD-900	900	40	3-13	15-50	55	1990X1640X2380
PYB-1200	1200	145	20-50	110-200	110	2805X2300X2980
PYZ-1200	1200	100	8-26	50-150	110	2805X2300X2980
PYD-1200	1200	50	3-15	18-105	110	2805X2300X2980
PYB-1750	1750	215	25-60	280-480	155-160	3610X2950X4185
PYZ-1750	1750	185	10-30	115-230	155-160	3610X2950X4185
PYD-1750	1750	85	5-15	75-230	155-160	3610X2950X4185
PYB-2200	2200	300	30-60	590-1000	260-280	4790X3430X5080
PYZ-2200	2200	230	10-30	200-580	260-280	4790X3430X5080
PYD-2200	2200	110	5-16	120-370	260-280	4790X3430X5080