baichy

Processing ability: 350–6000 kg/hBrief introduction: HGM series of three-rings and medium-speed micro powder grinder is a new type of making micro powder machines through more than twenties times research and improvement

Application:

pebble, limestone, granite, basalt, diabase, andesite, etc
HGM series of three-rings and medium-speed micro powder grinder is a new type of making micro powder machines through more than twenties times research and improvement, depending on two decades of hard work & experience and inputting the latest mechanical techniques of Sweden. It is an incorporated one of the two countries and a leader of the grinding industry nowadays.

Features:

1.Ultra-fine powder processing,the smallest size can reach 2500 mesh.
2.Safe and reliable operation in grinding cavity
3.Environmental protecting,less pollution

Working principle:

The main motor of HGM Three-rings Medium-Speed Micro-powder Grinder drivers spindle and every layer turntable rotating by reducer, through studs, turntable drive dozens of ring roller grinding rolling and rotating in grinding ring roll away. Bulk material was crushed into small particles by hammer crusher, then enter into storage silo by elevator, evenly to the material is sent into the middle of upper turntable by electromagnetic vibrating feeder. Material is scatter to the peripheral edge under the effect of centrifugal force, and fall into the grinding ring roll away, stamping, roll grinding, polishing and crushing by ring rolling. The material is crushed in the first layer then falls into the second and third layer. The pumping action of high pressure centrifugal fan sucked the external air into the machine, and send crushed coarse powder into powder separator through the third layer. The vortex generated by the rotating turbine of powder separator make coarse particulate material down regrinding, powder along with the air go into the cyclone powder collector, and discharge from lower discharge valve, that is finished product, but airflow along with a small amount of fine dust, is purified through pulse dust collector and then discharged from the fan and muffler.

Technical data:

Model		HGM60	HGM80	HGM100
AVERAGE DIAMETER (mm)		600	800	1000
PIECE	ROLLER	15	21	27
	RING OF ROLLER	2	2	2
FEEDING SIZE (mm)		≤10	≤10	≤10
μm		5-45	5-45	5-45
MESH		3250-325	3250-325	3250-325
CAPACITY (kg/h)		350-2500	600-4000	900-6000
MOTOR POWER (kw)	MAIN ENGINE	37	55	90
	POWDER CONCENTRATOR	11	18.5	30
	AIR BLOWER	30	45	75
	VIBRATING FEEDER	0.06	0.06	0.15
	DISCHARGE VALVE	0.75	1.1	1.1
(L*W*H)(m) OVERALL SIZE		10*2*5.5	11.9*2.7*5.8	14.5*3.8*6.3